Post-registration, RTOs are tasked with many responsibilities including annual declarations, AVETMISS reporting, and marketing compliance, and validation is often the most challenging.
Even though we’ve written about validation several times, let's revisit its definition. ASQA calls validation a quality review of the assessment process.
Essentially, validation is about identifying which parts of an RTO's assessment process are effective and which need improvement. With a proper grasp of its key aspects, validation becomes less daunting.
As per the 2015 SRTOs Clause 1.8, RTOs are required to ensure their assessment systems, including RPL, meet training package requirements and follow the Principles of Assessment and Rules of Evidence.
According to the standards, two types of validation are necessary.
The first validation type ensures your RTO's assessments comply with the training package requirements in your scope.
The following validation type ensures that assessments follow the principles of assessment and rules of evidence.
This implies that we validate both prior to and following the assessment. The focus of this article is on the first type: assessment tool validation.
Breaking Down the Two Types of Assessment Validation
An Introduction to Assessment Validation
As we mentioned earlier and in our past blogs, validation consists of two parts: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, also known as pre-assessment validation or verification, pertains to the first part of the clause, focusing on ensuring all unit requirements are met and that all workbooks are fully compliant.
On the implementation side, post-assessment validation ensures Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.
We will dedicate this article to assessment tool validation.
Methods for Conducting Assessment Tool Validation
Having distinguished between the two types of validation, let’s dive into the details of assessment tool validation.
Optimal Timing for Assessment Tool Validation
The purpose of assessment tool validation is to confirm that all elements, performance criteria, and performance and knowledge evidence are met by your assessment tools.
Therefore, any time you obtain new learning resources, assessment tool validation should be completed before students use them.
There's no need to wait for your next 5-year cycle validation schedule. Validate new resources immediately to ensure they are suitable for student use.
However, there are additional reasons to conduct this type of validation. Perform assessment tool validation also when you:
- you update your resources
- you add new training products on scope
- your course gets reviewed against training product updates
- your learning resources get identified as a risk during your risk assessment
ASQA's risk-based regulation approach requires RTOs to conduct regular risk assessments. Therefore, complaints from students about learning resources are a perfect time for assessment tool validation.
What Training Products Need Validation?
Bear in mind, this validation is meant to ensure all learning resources are compliant before use. All RTOs are required to validate all unit resources.
Getting Started with Assessment Tool Validation: Resources Needed
Teaching Materials
For validation of your assessment tools, you will require the full set of your learning resources:
Mapping tool – start by investigating this document. It shows which assessment items meet unit requirements, facilitating quicker validation.
Learner/student workbook – validate its suitability as an assessment tool. Confirm that instructions are clear and answer fields are sufficient. This is a common problem.
Assessor guide/marking guide – also verify if instructions for assessors are sufficient and if clear benchmarks for each assessment item are provided. Clear benchmarks are crucial for reliable assessment outcomes.
Other related resources – these might include checklists, registers, and templates developed separately from the workbook and marking guide. Ensure they are appropriate for the assessment task and meet unit requirements.
Validation Team
Clause 1.11 specifies the requirements for validation panel members. It states validation can be performed by one or more people. However, RTOs usually require all trainers and assessors to participate, sometimes including industry experts.
As a whole, your validation panel must have:
Relevant vocational competencies and industry skills for the unit being validated
Current knowledge and expertise in vocational teaching and learning
Any one of these training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or the equivalent successor
Validation document/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool is advantageous for both the validation process and documentation. It aids in viewing how each assessment item matches each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it can act as evidence that you have validated your resources before they are used by students.
While ASQA does not recommend or require a specific template for assessment tool validation, numerous templates are available online. These tools generally require validators to examine the tools as a whole to see if they meet the principles of assessment.
Principles of Assessment Checklist Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
Although these templates ease the validation process, they can cause errors in judgment as there is minimal space for commenting on each assessment item.
We highly recommend using a more detailed template to inspect each unit requirement and its corresponding assessment items. Here is an example:
Element Performance Criteria Assessment Directions Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What to Inspect?
As outlined in our blog post Common get more info Problems In Assessment Tools, your assessment tools must ensure trainers follow assessment principles and evidence rules.
Assessment Principles
Fairness – Are equal opportunities and access offered to everyone in the assessment process?
Flexibility – Does the assessment accommodate different options to demonstrate competence according to various needs and preferences?
Validity – Is the assessment assessing what it is intended to assess? Is it a valid tool for evaluating the required skill or knowledge?
Reliability – Will the assessment give consistent results every time, no matter who conducts the training? Will different assessors consistently decide on skill competence?
Basic Rules of Evidence
Validity – Is the evidence verifying that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence sufficient to ensure the learner has the required skills and knowledge?
Authenticity – Does the assessment tool confirm that the work is the candidate’s own?
Currency – Do the assessment tools align with current units of competency and up-to-date industry practices?
Despite being regularly covered in VET professional development and nationally recognised training, many tools still have issues with these requirements.
To prevent using learning resources that overlook some unit requirements, make sure to follow these guidelines:
Demonstrate What You Teach
Focus on the verbs used in the unit requirements and make sure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Perform each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:
diaper change
bottle preparation, feeding babies from bottles, and cleaning equipment
prepare solids and feed babies
respond to infant signs and cues appropriately
prepare and settle infants for sleep
monitor and promote age-appropriate physical exploration and gross motor skills
Having students describe changing nappies for babies under 12 months doesn’t directly fulfill the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.
Watch Out for the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t sufficient.
Full or Not Competent
Observe the lists. As mentioned above, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Could You Be More Specific?
Every assessment item should have clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, make sure your instructions do not confuse students or assessors. For example:
What kind of information can be included in a work package?
What kind of information can be included in a work package?
Possible answers include:
Essential resources
Applicable expenses
Time frame for activities
Allocated roles and responsibilities
If an assessment item demands multiple answers, specify the number of answers required from a student. This ensures your assessment is reliable, and the evidence obtained is valid.
The same applies to assessment items with double-barrelled questions or those requiring multiple answers simultaneously. These can confuse students and assessors, as demonstrated in the sample question below:
Identify a hazard and/or environmental issue in the work area and pick the most effective hazard control hierarchy.
Possible answers include, but are not limited to:
Weather conditions – isolation of work area, engineering controls, personal protective equipment
Work area and ground conditions – eliminating hazards, isolation, engineering
People – isolating, engineering controls, administration
Structural hazards – substitution, isolation, engineering controls
Chemical hazards – isolating, use of engineering controls, administrative controls
Equipment or machinery – isolation, engineering controls, administrative controls
Avoiding double-barrelled questions simplifies responses for students and allows assessors to judge competence accurately.
Seeing these requirements, you might wonder, “Don’t learning resource developers provide audit guarantees?” However, these guarantees mean you must wait for an audit to rectify noncompliance. This affects your compliance history, so it’s wiser to take a safe and compliant approach.